With the progress of the times, the topic of "dehumidification" has attracted more and more attention. Various dehumidifiers not only appear in daily life, but also become more and more common in industrial production. Industrial dehumidifiers can be seen in industries such as electric power, transportation, computer room, manufacturing, and breeding. So what problems should be paid attention to in the use of industrial dehumidifiers?
First of all, pay attention to the ambient temperature of the dehumidifier. The application range of conventional industrial dehumidifiers is recommended to be 5~40℃. When the ambient temperature is lower than 5℃, the water droplets attached to the surface of the evaporator will form frost, which will weaken the dehumidification effect of the machine; if the ambient temperature exceeds 40℃, the pressure in the system will rise, the compressor will be overloaded, and the compressor motor may be damaged. .
2. The newly purchased industrial dehumidifier should be allowed to stand for 2 to 4 hours before use. Because the industrial dehumidifier inevitably vibrates and rolls during transportation and placement, which causes displacement of the refrigerant in the compressor. If it is started immediately, the refrigerant will be poured back, and the compressor will be easily burned when idling. Therefore, it is necessary to let the industrial dehumidifier stand for about 2 to 4 hours to allow the refrigerant in the compressor to return to its original position before being energized.
3. Pay attention to the placement of dehumidifiers. Industrial dehumidifiers should be placed in a place where the air is ventilated and the ground is flat, so that moist air can be quickly drawn into the dehumidifier, and the dry air can quickly circulate to all corners of the air to achieve a better dehumidification effect. For example, dehumidifiers is suitable to be placed on the flat ground of the power distribution room. On the other hand, the machine should not be close to the wall, because the temperature of the machine will continue to rise after long-term operation; the air inlet of the machine should be far away from the goods. It is strictly forbidden to place objects on the top of the machine to avoid blockage and affect the effect of circulating dehumidification.
4. After the industrial dehumidifier is turned on, please try to keep it on standby. Be careful not to open it frequently. Dorosin industrial dehumidifiers are equipped with temperature and humidity monitoring sensors to accurately and efficiently control temperature and humidity. After the machine is started, there is no need to open and close frequently, which can reduce the damage to the performance of the machine, protect the dehumidification performance of the machine, and reduce the waste of electricity. Of course, if you do not use the machine for a long time, you can cut off the power supply. It is recommended to turn off the power immediately after a power failure to prevent sudden impact to the equipment and damage to the dehumidifier. Therefore, it is better to install an air switch when wiring the machine to facilitate the use of the machine in the event of a power failure.